TORCHES
- ATEX Approved for explosive gas and dust atmospheres
- LED light source ‘fitted for life’, no bulb replacement required
- High output focussed spot beam with wide angle fringe of light
- Up to 7.5 hours high power output from 4 x AA primary cells
- Compact and lightweight torch design
- Low battery indicator fitted on TR-40+ model
- Zone 0 version available
- All models with Group I Mining Approval
ATEX LED TORCH
Product Information
The high-tech Wolf ATEX LED Torch range uses the latest LED technology to give excellent performance and reliability in the most extreme conditions.
The Wolf ATEX LED Torch is CE marked to the ATEX Directive and certified to the IECEx Scheme, with versions allowing use in M1 and M2 mining applications as well as zones 0, 1 and 2 potentially explosive gas, vapour, mist and dust atmospheres, with T4 or T3 temperature class dependent on cell type used.
The compact and lightweight right-angle torch design has a high-grip ergonomic form with easy single handed switching, even with gloved hands. The high strength torch body has proven impact resistance even at sub zero temperatures. The rubber armoured lens ring and end cap give enhanced grip and shock protection. The lens is resistant to scratch and chemical attack. The torch is sealed dust tight and protected from water immersion, with a certified IP67 enclosure. The right-angle body arrangement incorporates a replaceable high strength thermoplastic belt clip for hands free use.
The TR-40, TR-40+ and TR-45 give outstanding light output from unique optics that deliver a piercing spot beam, combined with a low level flood of fringe light, giving a peak of 50 lumens light output from a high ower Luxeon LED. The light source has a 25,000 hour life and should be regarded as ‘fitted for life’. Powered by four AA/LR6 primary alkaline cells fitted in a cassette, Wolf ATEX LED Torches provide up t 7.5 hours at full brightness, and thereafter at reducing brightness up to 72 hours of light output. The TR-40+ model is fitted with a low battery power indicator, emitting a red flashing light through the side of the torch body while battery power and light output is high, but switching to continuous red when battery and light output is low.
Very low maintenance and quick component replacement are key benefits of this product range. All models are supplied with wrist straps and clip rings.
1.4W LED beam (approx 6°)
Peak luminous intensity at 5m 230lux
The Wolf ATEX LED Torch is CE marked to the ATEX Directive and certified to the IECEx Scheme, with versions allowing use in M1 and M2 mining applications as well as zones 0, 1 and 2 potentially explosive gas, vapour, mist and dust atmospheres, with T4 or T3 temperature class dependent on cell type used.
The compact and lightweight right-angle torch design has a high-grip ergonomic form with easy single handed switching, even with gloved hands. The high strength torch body has proven impact resistance even at sub zero temperatures. The rubber armoured lens ring and end cap give enhanced grip and shock protection. The lens is resistant to scratch and chemical attack. The torch is sealed dust tight and protected from water immersion, with a certified IP67 enclosure. The right-angle body arrangement incorporates a replaceable high strength thermoplastic belt clip for hands free use.
The TR-40, TR-40+ and TR-45 give outstanding light output from unique optics that deliver a piercing spot beam, combined with a low level flood of fringe light, giving a peak of 50 lumens light output from a high ower Luxeon LED. The light source has a 25,000 hour life and should be regarded as ‘fitted for life’. Powered by four AA/LR6 primary alkaline cells fitted in a cassette, Wolf ATEX LED Torches provide up t 7.5 hours at full brightness, and thereafter at reducing brightness up to 72 hours of light output. The TR-40+ model is fitted with a low battery power indicator, emitting a red flashing light through the side of the torch body while battery power and light output is high, but switching to continuous red when battery and light output is low.
Very low maintenance and quick component replacement are key benefits of this product range. All models are supplied with wrist straps and clip rings.
Technical Specification
Wolf ATEX LED Torch1.4W LED beam (approx 6°)
Peak luminous intensity at 5m 230lux
| TR-40 | TR-40+ | TR-45 | |||||
| Product description | High Power LED right angle safety torch | ||||||
| Yellow Body - Zone 1 | Yellow Body Zone 1 + low battery indicator | Black Body - Zone 0 | |||||
| Code | Industrial |
 II 2 GD Ex ib IIC T4/T3 tD A21 IP67 T85°C |
II 1 G Ex ia IIC T4/T3 IP67 |
||||
| Mining | I M2 Ex ib I IP67 |
I M1 Ex ia I IP67 |
|||||
| Apparatus standard | EN60079-0, EN50020, EN61241-0, EN61241-0 IEC60079-0, IEC60079-7, IEC60079-11, IEC61241-0, IEC61241-1 |
||||||
| Type of protection | 'ia/ib' Intrinsic Safety, tD Enclosure Protection | ||||||
| Area of classification (gas) | Zones 1 & 2 Gas Groups IIA, IIB IIC |
Zones 0, 1 & 2 Gas Groups IIA, IIB IIC |
|||||
| Max surface temp (gas) | T3/T4 | ||||||
| Ambient temperature (gas) | -20°C to +40°C | ||||||
| Area of classification (dust) | Zones 21 and 22 | - | |||||
| Max Surface Tem. (Dusts) | 85°C | - | |||||
| Ambient temperature (dust) | -20°C to +40°C | -20°C to +55°C | |||||
| Certificate | BAS07ATEX0091, IECEx BAS 06.0089 |
||||||
| Enclosure | High impact thermoplastic, chemical resistant, electrostatic non-hazardous | ||||||
| Lens | Shatterproof polycarbonate with scratch and chemical resistant hard coat | Toughened glass | |||||
| Beam type | High output beam with focussed spot and wide angle fringe of light | ||||||
| Light source: | Type | High Power LED | |||||
| Power | 1.4 Watts | ||||||
| Output | 50 lm peak | ||||||
| Life | 25,000 hrs plus (fitted for life) | ||||||
| Power source: | Pt. no. | TP-295 (4 x LR6 Cells) | |||||
| Cell Type | LR6 primary cells to IEC60086, Alkaline AA cells | ||||||
| Volts | 4 x 1.5v | ||||||
| Low Battery Indicator | - | Yes | - | ||||
| Light duration | Up to 7.5 hours at full brightness, up to 72 hrs total light duration | ||||||
| Ingress protection | IP67 to EN60529: 1992 | ||||||
| Weight (inc. cells) | 0.350Kg | ||||||
Copyright © 2007 www.wolf-safety.co.uk