Toplite T3 Searchlight
Zones: 1 and 2
The Toplite T3 Searchlight is a powerful, fully portable light source approved for use in Zones 1 and 2 hazardous areas and is ideal for use in inspection, maintenance, security and rescue/recovery applications, in potentially explosive gas atmospheres.
Advanced design and quality components ensure a long life for the Toplite, even in heavy industrial use. The Toplite casing is lightweight and durable, made from anti-static polyethylene polymer to withstand drop and impact even at sub zero temperatures. Ergonomic design ensures easy operation with gloved hands; and allows single handed full power/off/low power selection. Ingress protection of IP67 for use in excessively wet conditions, and if dropped in water it will float, beam upwards, for easy location. The light source is a glass sealed beam unit, protected by a toughened glass lens. The TL-9050T3 spotlight has a 50 watt halogen lamp, providing a 160,000 candle power spot beam of intense white light, ideal for long distance illumination. The TL-9055T3 floodlight has a 35 watt trapezoidal flood beam, providing a wide angle of illumination over a localised area, perfect for maintenance operations in hazardous areas. High power on the Toplite TL-9050T3 lasts for approximately 70 minutes, low power for up to 130 minutes. On the TL-9055T3, high power lasts approximately 100 minutes, low power lasts for up to 190 minutes.
The recharge time for a fully discharged battery is 16 hours. An electronic microprocessor control circuit manages the operation and charging of the lamp, with multi-coloured state of charge indicator which displays battery capacity (charge and discharge modes), a low voltage cut-off device which automatically switches off the lamp at end of discharge, and a 'walk-out mode' which warns when low voltage cut-off approaches by automatically switching the beam to low power output and pulsing off once every 15 seconds. It is also equipped with a power failure illumination facility which is selectable by the user.
Features & Benefits
- 50 Watt Halogen Power for Hazardous Areas
- 35 Watt Floodlight Version
- Tough Anti-Static Case
- State of Charge Indicator
- Microprocessor Control Circuit
- Low Power Switchable for Extended Duration
- Low Battery Warning Function
50W High Power Spotlight Rechargeable Inspection Lamp
Gas Zone: 1 and 2
35W High Power Floodlight Rechargeable Worklight
Gas Zone: 1 and 2
|Prodct Description||50W High Power Spotlight, Rechargeable Inspection Lamp||35W High Power Floodlight, Rechargeable Worklight|
|Code||EEx e m ib IIC T3|
|Type of Protection||"e" increased safety, "m" encapsulation
"ib" intrinsic safety
|Area of Classification (Gases)||Zones 1 and 2, Gas Groups IIA, IIB, IIC|
|Temp. Classification (Gases)||T3|
|Ambient Temperature||-20°C to +40°C|
|Certificate||BASEEFA Ex 92C3405|
|Light Source||Part Number||TL-9062T3||TL-9063T3|
|Type||Sealed Beam Unit with Halogen
Filled Filament Bulb
|Sealed Beam Unit with Filament Bulb|
|Beam||6.5° x 4°||Trapezoidal Flood|
|Life||100hrs (at 12.8V)||300hrs (at 12.8V)|
|Power Source||Part Number||TL-9492|
|Type||Rechargeable Battery, Nickel Cadmium|
|Life||Up to 1000 Recharge Cycles|
|Light Duration||70 mins (130 mins low power)||100 mins (190 mins low power)|
|Weight||4.0Kg (inc. battery)|
- All information has been gathered under laboratory conditions, the user must regard the values given as approximate.
- Changes may be made to the above specification without notification, details are available on request.
50W Spot Beam (approx. 6.5°)
Peak luminous intensity at 5m 2750lux
35W Flood Beam (approx. 30°)
Peak luminous intensity at 5m 35lux
Downloads & Resources
(PDF, 103 KB)
(PDF, 562 KB)
Version: SL029 DF440 Issue 4
Make an enquiry…
Thank you for your interest in Wolf Safety and our hazardous area portable and temporary lighting.